Times are changing! Choose a foam adhesive that will enhance your daily work. Free yourself from long working hours and tedious cleaning. Orbafoam ETICS fast adhesive foam is a specialised product, even for the most demanding contractors.
Discover a new technology! Trust in an adhesive foam with polyurethane (PU) technology that will improve your work and your working comfort. Working with Orbafoam ETICS fast adhesive will free you from the heavy loads and dust that are generated with cement adhesives.
See how Orbafoam ETICS foam can meet all your expectations.
Do you need to level and smooth walls? You can’t think of a product that meets these requirements? Choose a modern solution that will even out irregularities in walls and reduce your work time.
ETICS foam is a state-of-the-art product! Controlled application that allows you to correct possible unevenness of walls by up to 3cms, with the added advantage of being easy and comfortable to use.
Check out the possibilities of Quilosa Professional’s fast adhesive: Orbafoam ETICS. See what you will achieve by choosing this solution
The design of its adhesive foam formula with PU technology generates a quick adhesion to the surface, regardless of the wall’s construction material.
The foam adhesive’s fast-setting formula permanently stabilises the thermal insulation material on the wall, allowing a faster start to subsequent insulation work (e.g. anchors).
The insulation board can be adjusted for up to 10 minutes after application.
High density and flexible consistency. Orbafoam ETICS fast foam adhesive allows for the levelling of typical wall imperfections.
You do not need water, electricity or a mixer to use it. All you need is an application gun. A solution that allows your jobs to be clean and organised.
Polyurethane technology is well-known for being light. Orbafoam ETICS, adhesive foam for fixing thermal insulation boards, reduces their weight by up to 4KG / board compared to cement-based adhesive works. Lighter work and less loading of the wall.
The product is ready to use.
ETICS foam has λ: 0.036 W/mK. Solution for the installation of insulation boards and the sealing of gaps and joints with the same product. Effectively eliminates heat loss.
This ensures the foam components are mixed correctly
And keep the can in an “inverted” position during screwing and subsequent application
The thickness of the cord should be 2-3cm, leaving a minimum distance of around 2cm from the edge of the board. Apply the foam as shown in the image.
Do this immediately after applying the adhesive foam by pressing the board onto the wall, avoiding excessively flattening the adhesive. Pre-set the board’s final position.
Do this by adjusting them until they are correctly installed, pressing or separating them from the wall. You can carry out corrections during the first 10 minutes.
The foam will be fully set after these two hours.
SETS IN 60 SECONDS
POWER FIX INSTANT STRONG
AQUA PROTECT P4