Ready to use with triple speed of work
Quickly combines different materials
Forget about carrying heavy bags, dust, mixing and also save electricity and water.
Do you need to level and smooth walls? You do not know of any product that can meet these requirements? Choose a modern solution that evens out irregularities in the walls and reduces your work time.
Foam Adhesive for Gypsum Cardboard is a new generation product! It is precise in use, perfectly copes with unevenness up to 2cm, it is also easy and pleasant to use.
Foam Adhesive for Gypsum Cardboard is a breakthrough in the construction market! It is an innovative product that reduces working time. Foam Adhesive for Gypsum Cardboard is created by professionals and on the basis of their experience.
Saves time and optimizes work. ¡Apply, adjust, and go!
Adjust the plate vertically and horizontally as well as the distance to the substrate, thus creating a perfect wall.
After final adjustment, the board will not change position. The next board can be joined without the need for secondary adjustment.
The adhesive is ideal for use on a wide range of materials
You can save a lot of money by reducing your working hours. 100 m 2 per hour, being able to go to the next process in just 30 minutes.
The product is ready to use immediately.
One-pot yields like a 40kg bag of mortar, and is equivalent to an area of 3 plasterboards (10m 2 )
|Temperature of application:||from 5°C to +30°C|
|Container temperature:||from +10°C to +30°C|
|Max. bonding time of the board:||≤ 2 min. **|
|Open Time:||≤ 1,5 min **|
|Adjustment time:||≥ 5 min**|
|Time for the next process:||> 30min **|
|Capacity (covering):||to 10 m2 (3 boards)*|
|Fire resistance:||F/B3 (EN 13501/DIN 4102)|
|Solvents (before curing):||Orbafoam Fresh Foam Cleaner|
* Measured for a cord diameter between 2-3 cm, the final performance depends on the temperature, humidity, the distance between the bonded material and the wall and the chosen application method.
** Measured at + 23ºC and 50% relative humidity; All parameters are measured according to the internal standards of the Selena Group and are highly dependent on curing conditions (container temperature, air humidity, surface temperature, equipment quality, air pressure, user skills) .
POWER FIX INSTANT STRONG
AQUA PROTECT P4 WALKABLE
AQUA PROTECT MS GUIANA