One of the main causes of leaks and dampness is the seepage of water through the roofs of buildings. We propose a solution to remedy it, with the right product!

In Quilosa Selena Iberia we have developed the AquaProtect Leak Repairer, the first liquid waterproofing that can be applied in the worst weather conditions. Thanks to our R&D in our factory in Quer, this product is a 100% solid polymer that can be used on wet surfaces, even when it’s raining.

INDICATIONS FOR USE:

The Surface must be firm and free of dust, mud, oil, grease, etc.

• Metals: remove corroded parts and any other Paint mechanically.

• Plastics: sand to increase the roughness of these materials and clean with solvent.

• Bituminous materials: with this material it’s necessary to always use our Primer for Liquid Ms Silicone.

The Liquid Ms Silicone Aquaprotect can be applied directly with a brush, a roller or a spatula, even with an airless machine.

If another layer is needed, wait a minimum of 24 hours and apply a layer of least 1.5mm thick.

The Liquid Ms Silicone Aquaprotect can be applied directly with a brush, a roller or a spatula, even with an airless machine.

If another layer is needed, wait a minimum of 24 hours and apply a layer of least 1.5 mm. thick.

Learn more about our range Aquaprotect.